Application

● It adopts a wrapped structure, and the conductor is made of ultra-fine copper wire with a diameter of 0.08mm twisted together.

● It features a tin-plated copper wire braided shield layer to minimize signal interference.

● The inner core wires are paired and twisted, and each pair has a different twist pitch, facilitating signal transmission and avoiding crosstalk interference.

● It is suitable for extremely harsh industrial environments and places with corrosive coolant and lubricating oil, exhibiting excellent oil resistance and abrasion resistance.

● It has good resistance to microorganisms, hydrolysis, chemical corrosion, UV radiation, and low temperatures.

● It can be used indoors and outdoors in dry or humid conditions, especially suitable for industrial environments.

● Under normal usage conditions, it generally has a service life of more than 15 million cycles, suitable for use in high-speed motion drag chains.

Mainly used for data transmission in industrial automation, electromechanical equipment, machine tools, logistics equipment, and servo systems operating in harsh environments.

● 0.08mm² tinned copper (below 0.5mm²) or bare copper (0.5mm² and above) conductors

●Ultra-fine copper wire, compliant with DIN VDE 0295 Class 6 and IEC 60228 Class 6

● Special PVC insulation

● Color-coded cores (below 0.5mm²)

● Black color-coded cores with continuous white numerical coding (0.5mm² and above)

● Optimal pitch concentric stranded cores

● Improved tinned copper wire braided shiel

● Minimum coverage of 90%

● Low friction, wear-resistant, low-temperature resistant, and oil-resistant PUR composite material.

● Grey, black, green or color can be customized according to customer requirements.

High-flexible drag chain cable testing standards

(10 million times reliability tests for drag chain)

1.Drag Chain Bending Test

Test method: Take a 2-meter finished cable assembly, bend it with a radius 6 times the outer diameter of the cable, move it back and forth for a travel distance of 900mm at a speed of 90 cycles per minute.

Judgment criteria: 1. Over 10,000,000 cycles of reciprocating movement without open circuit or short circuit. 2. No breakage in the sheath.

2.Two-wheel bending test

Test method: Take a 5-meter finished cable, according to the specified pulley diameter and weight of the load, the pulley moves back and forth at a speed of 0.33 meters per second, with a movement distance of more than 1.0 meter.

Judgment criteria: 1. Over 500,000 cycles of reciprocating movement without open circuit or short circuit. 2. No breakage in the sheath.

3.90-degree bending test

Test method: Take a 2-meter finished cable, bend it with a radius 2.5 times the outer diameter of the cable, using the specified weight according to the standard, and bend at a speed of 40 cycles per minute.

Judgment criteria: 1. Over 200,000 cycles of reciprocating movement without open circuit or short circuit. 2. No breakage in the sheath.