Technical data Linear encoder connection cable
● TPE-E insulation, special PUR outer sheath with ultra-high strength and bending performance
●Meets TUV2 PfG requirements
●Temperature range: -20°C to +80°C for mobile installation -40°C to +90°C for fixed installation
●Nominal voltage 300/500V
●Test voltage 2000V
●Insulation resistance: Minimum 100 MOhm x km Minimum bending radius:6 x the cable diameter for mobile installation 4 x the cable diameter for fixed installation
●Complies with EU RoHS and Reach regulations.
●Oil resistance: Fully resistant to oil (in compliance with DIN EN50363-10-2 standard), Cass3.
● Black or color can be customized according to customer requirements.
● Bare copper conductor, ultra-fine copper wire
●Complies with DIN VDE 0295 Class 6 and IEC standards
● TPE-E insulation
● Core wires in various colors
● Optimal pitch layering of core wires
● Special material inner sheath
● Cải thiện khả năng che chắn bằng dây đồng mạ thiếc
● Minimum coverage of 95%
● Low-friction, PUR-based compound suitable for use in drag chains (in compliance with Part 10 of DIN 0281 standard).
| ULTRA HIGH SPEED LINEAR ENCODER AND CONTROL CABLE ( 20 million times reliability tests for drag chain) | ||||
| KHÔNG. | Mã sản phẩm | Số lõi và diện tích mặt cắt ngang | Đường kính ngoài gần đúng （mm) | Màu vỏ ngoài |
| (SỐ.Xm㎡) | ||||
| 1 | LM-YP2006.08.0020 | 4x2x0,2 | 6 | Đen |
| 2 | LM-YP2006.08.0014 | 4x2x0,14 | 5,5 | Đen |
| 3 | LM-YP2002.08.0014 | 8×0,14 | 5.2 | Đen |
| 4 | LM-YP2002.05.0014 | 5×0,14 | 4.2 | Đen |
According to the characteristics of high-speed operation, high acceleration, high precision, and small bending radius of linear motors, the conductor is designed using ultra-fine copper wire with precise twisting. It is insulated with ETFE and has a high-quality PUR outer sheath, greatly improving the cable’s fatigue resistance. Under normal use, the bending life can exceed 20 million cycles. It is completely oil-resistant and can withstand low temperatures
50 Million Times Linear encoder connection cable test standard |
||
| Drag chain bending test | Two rounds of winding test | 90 degree bending test |
| Test method: Take a 2-meter finished cable assembly, bend it with a radius 6 times the outer diameter of the cable, move it back and forth for a travel distance of 900mm at a speed of 90 cycles per minute. | Test method: Take a 5-meter finished cable, according to the specified pulley diameter and weight of the load, the pulley moves back and forth at a speed of 0.33 meters per second, with a movement distance of more than 1.0 meter. | Test method: Take a 2-meter finished cable, bend it with a radius 2.5 times the outer diameter of the cable, using the specified weight according to the standard, and bend at a speed of 40 cycles per minute. |
 |
 |
 |
| Judgment criteria: 1. Over 50,000,000 cycles of reciprocating movement without open circuit or short circuit. 2. No breakage in the sheath. | Judgment criteria: 1. Over 1000,000 cycles of reciprocating movement without open circuit or short circuit. 2. No breakage in the sheath. | Judgment criteria: 1. Over 1000,000 cycles of reciprocating movement without open circuit or short circuit. 2. No breakage in the sheath. |
